INVOLUTE AUTOMATION

2-AXES-AUTOLADLE


Auto ladle transfers molten aluminum metal from a holding furnace to a high pressure die casting machine. Machine is driven electrically and transfers metal from furnace to the die casting machine without any spillage of metal.

 

The angular speed and the dipper and crank, shot weight selection and the timer values can be altered from the controlled panel.It has 2 axes. i.e. crank and dipper. Shot weight carrying capacity can be up to 5 kgs.

 

INVOLUTE AUTOMATION

3-AXES-AUTOLADLE


It has 3 axes: horizontal, vertical and dipper. The angular speed and the dipper and crank, shot weight selection and the timer values can be altered from the controlled panel. Shot weight capacity can be up to 50 kgs depending on the model.
INVOLUTE AUTOMATION

AUTOLADLE-20kg-CAPACITY


Shot weight capacity is up to 20 kg. Pouring profile can be adjusted as required through MMI.
Can be used in Gravity / PDC setup. Metal can be transferred with out spillage and with minimul
heat loss.
INVOLUTE AUTOMATION

AUTOSPRAYER


Auto sprayer uses uniquely designed spray nozzles and Spray manifold for spraying lubricant / coolent. Separate programs for blow and spray is a standard feature.


These nozzles and maifoldes are designed without any moving rubber parts for minimum and easy maintenance. Timers are set from the control panel.


Prime movers are electric and are controlled using PLC.

 

INVOLUTE AUTOMATION

EXTRACTOR


Extractor is used to pick up the ejected casting of a die casting machine and placing it on a conveyor or BIN.

This can be mounted on the die casting machine. The angular speed can be varied.
INVOLUTE AUTOMATION

GANTRY SYSTEMS FOR CORE HANDLING


Gantry systems are employed for unit material handling application. Prime movers are servomotors and the control is by PLC.


Gantry systems can be used for handling cores sand shells and molten metal in gravity casting application.

 

INVOLUTE AUTOMATION

GANTRY AUTOPOUR 50Kg


Gantry autopour is used in Gravity die casting setup where number of furnaces and dies are to be served with one machine. Autopour is driven with Servo motors and Control is by PLC. Length of the gantry can be customized as per the requirement. Different pouring profiles can be programmed.

INVOLUTE AUTOMATION

GRAVITY AUTOLADLE


Gravity auto ladle can be used as an tilting and stationary gravity machine. Model is employed to pickup metal from one furnace to one die casting machine. Shot weights up to 50 kgs can be handled. Hydraulic or electric versions are available. Pouring profile can be programmed with three different speeds.
INVOLUTE AUTOMATION

LINER ATOPOUR


Involute linear auto pour moves on a linear track laid between furnaces and dies. Multiple no of furnaces and dies can be served with a single machine. Dies and furnaces are arranged on the either side of the track.
Short weights up to 40 kgs can be handled.
All axis are driven by servomotors.
User interface is through MMI.
Linear track can also be used as track motion for robots.
INVOLUTE AUTOMATION

ROTARY AUTOPOUR


Rotatory autopour serves gravity dies which are arranged on a circumference of a circle.
Upto 4 dies can be used in a single setup. Shotweights upto 10kg can be handled. Different positions can be programmed through MMI. Pouring profile can be programmed.