INVOLUTE AUTOMATION

GANTRY SYSTEMS FOR CORE HANDLING


Gantry systems are employed for unit material handling application. Prime movers are servomotors and the control is by PLC.


Gantry systems can be used for handling cores sand shells and molten metal in gravity casting application.

 

INVOLUTE AUTOMATION

GANTRY AUTOPOUR 50Kg


Gantry autopour is used in Gravity die casting setup where number of furnaces and dies are to be served with one machine. Autopour is driven with Servo motors and Control is by PLC. Length of the gantry can be customized as per the requirement. Different pouring profiles can be programmed.

INVOLUTE AUTOMATION

GRAVITY AUTOLADLE


Gravity auto ladle can be used as an tilting and stationary gravity machine. Model is employed to pickup metal from one furnace to one die casting machine. Shot weights up to 50 kgs can be handled. Hydraulic or electric versions are available. Pouring profile can be programmed with three different speeds.
INVOLUTE AUTOMATION

LINER AUTOPOUR


Involute linear auto pour moves on a linear track laid between furnaces and dies. Multiple no of furnaces and dies can be served with a single machine. Dies and furnaces are arranged on the either side of the track.
Short weights up to 40 kgs can be handled.
All axis are driven by servomotors.
User interface is through MMI.
Linear track can also be used as track motion for robots.
INVOLUTE AUTOMATION

ROTARY AUTOPOUR


Rotatory autopour serves gravity dies which are arranged on a circumference of a circle.
Upto 4 dies can be used in a single setup. Shotweights upto 10kg can be handled. Different positions can be programmed through MMI. Pouring profile can be programmed.